Updating Meter Usage Information

Learn how to update the usage and capacity information for your meters

Review the video together with the steps outlined below, then use the button provided to continue to the next topic.

1. Open your Lead and select ‘Meters’ within the treeview on the left
2. Click on the Meter Number you wish to update the consumption for or click ‘Go’ on the right under actions and select ‘edit’.
3. This will open the meter tab within the Meters area. Scroll down to the bottom where you will see ‘Annual Tender Consumption’.
4. Add your annual consumption value to this box (this must be 1kWh or higher) and click save.
5. This has now been updated and will be used for future tenders that are generated.
6. If your meter is Half Hourly, Open your Lead and select ‘Meters’ within the treeview on the left. Click on the Data button for the meter in question.
7. In the top left hand corner of the page that has loaded, add in the annual consumption figure and tick the box.
8. Your Half Hourly consumption is now stored.